Teach you a small coup for lighting and power saving

Today, the manufacturer will teach you some tips for saving power and lighting. Come and watch!

Lighting used in daily life is indispensable. Some people have to turn on all kinds of lights for beauty to reflect the effect. Household lighting does not need to be so complicated. There is only one need for households and that is lighting. The lighting also requires a lot of electricity and wastes energy. How can we achieve both power saving and lighting? The following author gives you some tips:

1. Learn to use natural light to process the walls with better lighting at home into white or higher reflection coefficient materials. With the help of reflection and reflection, it can greatly improve the visual experience of the home, reduce the frequency and time of use of lamps, and save money. Electricity.

2. Replace low-efficiency light sources or lamps. Replace incandescent lamps with energy-saving lamps. Incandescent lamps consume about three times the power of energy-saving lamps. For places with long lighting times or infrequent switching actions, such as living rooms, bedrooms, etc., remove the incandescent lamps and switch to energy-saving lamps. , The purpose of saving electricity can be achieved immediately. Power saving, energy saving Start with you and me, start from the dots, energy saving and environmental protection-just to continue the excitement of the earth!

3. Improve the lighting efficiency of the existing lighting equipment and clean the lighting fixtures regularly. When the lamp has not been cleaned for a long time, the lamp tube and reflector will gradually accumulate dust, which will reduce the output efficiency. Therefore, the lamp should be cleaned regularly at least every three months to maintain the output efficiency of the lamp.

4. Energy-saving lamps should not be switched on and off frequently. Energy-saving lamps consume the most power when starting up, and each switch on and off will reduce the life of the bulb by about 3 hours, so it is recommended to minimize the switching frequency of energy-saving lamps. In addition, because the energy-saving lamp is characterized by the longer the time after being turned on, the brighter it is, the more energy-saving, so if you go out at night within 2 hours, it is best not to turn off the light, because it consumes more electricity than turning on the light. More cost-effective.

https://www.cntoplighting.com/