Light pole structure
1. Steel lamp post and bracket, surface spray treatment, battery board connection adopts patented anti-theft screw solar panel bracket can rotate 360 degrees, the pole is tapered design, the control box is buried, the flange of the pole is first After hot-dip galvanizing, spray again to prevent corrosion caused by rain and snow and moisture, control the box, and install patent anti-theft screws. Each part of the fixing screws are made of stainless steel and spring eyeliner is tight, and it is not allowed to loosen. The lamp 坨 and the lamp post flange have no cracks and scratches, and the screws are complete, and the bolt length can penetrate the lamp 坨 flange.
2. Light pole strength: The total anti-wind pressure value is 40kg/m2. Lamp post, panel bracket and luminaire (except light source) Lifetime: 12 years or more luminaire structure.
3. The reflector of the lamp is stretched by high-purity anodized aluminum plate and sealed by oxide film, and the reflection effect is good. The lampshade is made of PC with good transparency, high temperature resistance, anti-aging and light transmittance of over 85%. Waterproof and dustproof grade IP65
4. The center line of the light source falls within the range of the road width (calculated according to the X-axis of 120 degrees), and the elevation angle of each street is consistent; the life of the solar cell module: 25 years or more, the battery life: not less than 3-5 years, the battery must Take foam insulation measures; controller life: 8 years; LED light source life is more than 60,000 hours, light source light decay is not higher than 15% within 1 year.
5. The solar energy system guarantees that the energy storage power supply time is not less than 3-5 consecutive rainy days. All equipment and equipment meet the technical requirements of relevant national standards, and there are test reports provided by the nationally recognized testing units during the validity period.
